1831 Ultrasonic
Cleaning Solution Concentrate
Presenting our 1831 Concentrate: a mild, organic acid product
which safely and efficiently removes
smut, scale, and oxides from ferrous and nonferrous metals, resulting in a deep
reflective finish.
Formulated for use in ultrasonic cleaning systems, 1831 not only removes
corrosion, but it helps
preventing parts from corroding after cleaning.
The days of using strong, hazardous, and corrosive
inorganic acid cleaners are gone with the introduction of 1831 Cleaning
Concentrate.
|
PHYSICAL
PROPERTIES |
| Appearance: |
Orange Liquid |
| pH @ 1% solution: |
4.8 |
| Odor: |
Mild |
| Foaming
action: |
Controlled |
| Solubility in
water: |
Complete |
| Rinsing
action: |
Excellent |
| Metal Safety: |
All Metals |
USAGE & DILUTION RECOMMENDATIONS
For stripping metal oxides from parts in soak tanks or ultrasonic cleaning
applications, use 9 ounces per gallon of water (7% solutions). Concentrations
higher than 7% will not work more efficiently.
Solution temperature should be maintained between 130° F and 140° F. We recommend the
use of a quality ultrasonic unit for highest efficiency. Rust and scale can
normally be removed in 30
seconds to 2 minutes. The same concentrations may be used for passivation of
stainless steel.
HANDLING & STORAGE
This product does not pose any fire hazards. Use good industrial hygiene practices such as wearing
rubber gloves and an impermeable apron to protect sensitive skin. Chemical safety goggles
should be worn to protect eyes. If eye contact occurs, flush with plenty of
water for at least 15 minutes and consult a physician. In case of skin contact, wash with soap and
water, removing contaminated clothing and shoes. Keep product containers tightly closed when not
in use. Store in the original container between 45° and 85°F. When stored as above, shelf life is
a minimum of 2 years.
Refer to our Material Safety Data Sheet for additional information.
Customer Service and Sales: (877)-234-6900 or (248)-340-0342
Rev. 12/03
| 
